Datasheet

Hanning
www.ti.com External ADC Sampling Clock
Figure 4. User Interface: Single FFT Format
9 External ADC Sampling Clock
To use the external clock generator to test the AFE5803, perform the following steps.
1. Reconfigure JP9 as shown in the following illustration. The rest of the jumpers remain the same.
2. Connect the external generator as shown in Figure 5.
3. Set the generator output to 40 MHz, 13 dBm.
11
SLOU332A– January 2012– Revised January 2012 AFE5803EVM (Revision E ) Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated