User manual

Running the Software

www.ti.com

4.1.3 Save Tab

The Save tab shown in Figure 33 provides provisions to save the analysis or data to a file. By default, the

data are saved to the following location:

• On a Windows XP machine

– C:\Program Files\Texas Instruments\AFE44x0SPO2EVM GUI\Log

• On a Windows 7 or Windows 8 machine

– C:\Program Files(x86)\Texas Instruments\AFE44x0SPO2EVM GUI\Log

Use the Directory to Save Files option to select the folder where data are to be saved. In the pop-up

window, navigate to the folder where the data file is to be saved and select Use Current Folder. Then

select Save to File to save the file.

When the user selects the auto save after capture selector under 'ADC Capture & Analysis' tab, the GUI

uses the settings selected under 'Analysis to Save,' 'Channels to Save,' 'Data to Save,' and 'Save File

Settings'. The user will be notified with a 'Results saved successfully!' after every capture.

Figure 33. Save Tab

AFE4400 and AFE4490 Development Guide SLAU480C–January 2013–Revised May 2014

Submit Documentation Feedback