Datasheet

Running the Software

www.ti.com

4.1.4 Save Tab

The Save tab shown in Figure 28 provides provisions to save the analysis or data to a file. By default, the

data are saved to the following location:

• On a Windows XP machine

– C:\Program Files\Texas Instruments\AFE44x0SPO2EVM GUI\Log

• On a Windows 7 machine

– C:\Program Files(x86)\Texas Instruments\AFE44x0SPO2EVM GUI\Log

Use the Directory to Save Files option to select the folder where data are to be saved. In the pop-up

window, navigate to the folder where the data file is to be saved and select Use Current Folder. Then

select Save to File to save the file.

Figure 28. Save Tab

Table 1 contains the Save tab control descriptions.

Table 1. Save Tab Control Descriptions

Button/Control Description

Scope Analysis Saves the scope analysis result.

The result is saved in the file Device_<record number>_Analysis.xls.

FFT Analysis Saves the FFT analysis result.

The result is saved in the file Device_<record number>_Analysis.xls.

Histogram Analysis Saves the histogram analysis result.

The result is saved in the file Device_<record number>_Analysis.xls.

Data - Codes Acquired data sample values are stored to the file Device_ <record number>_Codes.xls.

FFT Data Acquired data sample’s FFT values are stored to the file Device_ <record number>_FFT.xls.

Histogram Data Acquired data sample’s histogram values are stored to the file Device_ <record number>_Histogram.xls.

AFE4400 and AFE4490 Development Guide SLAU480A–January 2013–Revised February 2013

Submit Documentation Feedback