Datasheet

AFE030
www.ti.com SBOS588A –DECEMBER 2011– REVISED DECEMBER 2011
Table 14. RESET Register: Address 09h
Default: 00h
Reset Register <7:0>
LOCATION
BIT NAME (0 = LSB) DEFAULT R/W FUNCTION
-- 0 0 -- Reserved
-- 1 0 -- Reserved
SOFTRST0, These bits are used to perform a software reset of the ENABLE1,
SOFTRST1, 2, 3, 4 0, 0, 0 W ENABLE2, CONTROL2, CONTROL3, and GAIN SELECT
SOFTRST2 registers. Writing '101' to these registers performs a software reset.
This bit is used to indicate the status of a PA thermal overload.
0 = On read, indicates that no thermal overload has occurred since
the last reset.
T_FLAG 5 0 R/W
0 = On write, resets this bit.
1 = On read, indicates that a thermal overload has occurred since
the last reset. Remains latched until reset.
This bit is used to indicate the status of a PA output current
overload.
0 = On read indicates that no current overload has occurred since
I_FLAG 6 0 R/W the last reset.
0 = On write, resets this bit.
1 = On read indicates that a current overload has occurred since
the last reset. Remains latched until reset.
— 7 0 — Reserved
Table 15. DieID Register: Address 0Ah
Default: 01h
DieID Register <7:0>
LOCATION
BIT NAME (0 = LSB) DEFAULT R/W FUNCTION
DIE ID<0> 0 1 R The DieID Register is hard-wired.
DIE ID<1> 1 0 R The DieID Register is hard-wired.
DIE ID<2> 2 0 R The DieID Register is hard-wired.
DIE ID<3> 3 0 R The DieID Register is hard-wired.
DIE ID<4> 4 0 R The DieID Register is hard-wired.
DIE ID<5> 5 0 R The DieID Register is hard-wired.
DIE ID<6> 6 0 R The DieID Register is hard-wired.
DIE ID<7> 7 0 R The DieID Register is hard-wired.
Table 16. Revision Register: Address 0Bh
Default: 02h
Revision Register <7:0>
LOCATION
BIT NAME (0 = LSB) DEFAULT R/W FUNCTION
REVISION ID<0> 0 0 R The Revision Register is hard-wired.
REVISION ID<1> 1 1 R The Revision Register is hard-wired.
REVISION ID<2> 2 0 R The Revision Register is hard-wired.
REVISION ID<3> 3 0 R The Revision Register is hard-wired.
REVISION ID<4> 4 0 R The Revision Register is hard-wired.
REVISION ID<5> 5 0 R The Revision Register is hard-wired.
REVISION ID<6> 6 0 R The Revision Register is hard-wired.
REVISION ID<7> 7 0 R The Revision Register is hard-wired.
Copyright © 2011, Texas Instruments Incorporated 39
Product Folder Link(s): AFE030