Datasheet

www.ti.com

Advanced bqMTester Instructions

5. The TI USB Firmware Update driver is now installed for this instance of the EV2x00. Click Finish to

exit this Found New Hardware Wizard.

6. After a few seconds, another Found New Hardware Wizard screen appears to start the installation of

the final driver for this instance of the EV2x00. Select No, not this time and click Next. If the screen

that appears does not look like this screen, then proceed to the next step.

7. Select Install the software automatically (Recommended) and click Next on the next Found New

Hardware Wizard screen for the second of the two drivers (TI USB bq80xx Driver) required for this

instance of the EV2x00.

SLUU397A– February 2011– Revised May 2011 Advanced bqMTester

Submit Documentation Feedback