Datasheet

ADS8638EVM-PDK Kit Operation

www.ti.com

Step 3. Plug the ADS8638EVM into the MMB0 as Figure 5 illustrates.

Figure 5. Connecting ADS8638EVM to MMB0

Step 4. Set the jumpers on the ADS8638EVM as shown in Figure 1 (note that these settings are the

factory-configured default settings for the EVM).

6.2.1 About the MMB0

The MMB0 is a Modular EVM System motherboard. It is designed around the TMS320VC5507, a DSP

with an onboard USB interface from Texas Instruments. The MMB0 also has 16 MB of SDRAM installed.

The MMB0 is not sold as a DSP development board, and it is not available separately. TI cannot offer

support for the MMB0 except as part of an EVM kit. For schematics or other information about the MMB0,

contact Texas Instruments.

ADS8638EVM-PDK SBAU192–July 2011

Submit Documentation Feedback