Datasheet

ADS8515

SLAS460D –JUNE 2007–REVISED SEPTEMBER 2010

www.ti.com

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

PACKAGE/ORDERING INFORMATION

(1)

MINIMUM NO MINIMUM SPECIFIED

INL MISSING SINAD TEMPERATURE PACKAGE- PACKAGE ORDERING TRANSPORT

PRODUCT (LSB) CODE (dB) RANGE LEAD DESIGNATOR NUMBER MEDIA, QTY

ADS8515IBDB Tube, 50

ADS8515IB ±2 16 Bits 89 –40°C to 85°C SSOP-28 DB

ADS8515IBDBR Tape and Reel, 2000

ADS8515IDB Tube, 50

ADS8515I ±3 16 Bits 87 –40°C to 85°C SSOP-28 DB

ADS8515IDBR Tape and Reel, 2000

(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the

ADS8515 product folder at www.ti.com.

ABSOLUTE MAXIMUM RATINGS

(1)(2)

Over operating free-air temperature range (unless otherwise noted)

ADS8515

±25V

Analog inputs CAP +V

ANA

+ 0.3 V to AGND2 – 0.3 V

REF Indefinite short to AGND2, momentary short to V

ANA

DGND, AGND1, AGND2 ±0.3 V

Ground voltage differences V

ANA

6 V

DIG

6 V

Digital inputs –0.3 V to +V

DIG

+ 0.3 V

Maximum junction temperature 165°C

Internal power dissipation 825 mW

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) All voltage values are with respect to network ground terminal.

Product Folder Link(s): ADS8515