Datasheet

ADS8326
SBAS343C –MAY 2007–REVISED SEPTEMBER 2009.................................................................................................................................................. www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
MAXIMUM NO
INTEGRAL MISSING
LINEARITY CODES SPECIFIED TRANSPORT
ERROR ERROR PACKAGE- PACKAGE TEMPERATURE PACKAGE ORDERING MEDIA,
PRODUCT (LSB)
(2)
(LSB) LEAD DESIGNATOR RANGE MARKING NUMBER QUANTITY
Tape and Reel,
ADS8326IDGKT
250
ADS8326I ±3 16 MSOP-8 DGK –40°C to +85°C D26
Tape and Reel,
ADS8326IDGKR
2500
Tape and Reel,
ADS8326IBDGKT
250
ADS8326IB ±1.5 16 MSOP-8 DGK –40°C to +85°C D26
Tape and Reel,
ADS8326IBDGKR
2500
Tape and Reel,
ADS8326IDRBT
250
ADS8326I ±3 16 SON-8 DRB –40°C to +85°C D26
Tape and Reel,
ADS8326IDRBR
2500
Tape and Reel,
ADS8326IBDRBT
250
ADS8326IB ±1.5 16 SON-8 DRB –40°C to +85°C D26
Tape and Reel,
ADS8326IBDRBR
2500
(1) For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet, or see
the TI website at www.ti.com.
(2) Maximum Integral Linearity Error specifies a 5V power supply and reference voltage.
ABSOLUTE MAXIMUM RATINGS
(1)
Over operating free-air temperature range (unless otherwise noted).
ADS8326 UNIT
Supply voltage, V
DD
to GND –0.3 to +7 V
Analog input voltage
(2)
–0.3 to V
DD
+ 0.3 V
Reference input voltage
(2)
–0.3 to V
DD
+ 0.3 V
Digital input voltage
(2)
–0.3 to V
DD
+ 0.3 V
Input current to any pin except supply –20 to +20 mA
Power dissipation See Dissipation Ratings Table
Operating virtual junction temperature range, T
J
–40 to +150 °C
Operating free-air temperature range, T
A
–40 to +85 °C
Storage temperature range, T
STG
–65 to +150 °C
Lead Temperature 1.6mm (1/16 inch) from case for 10sec +260 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to ground terminal.
2 Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS8326