Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
PACKAGE DISSIPATION RATINGS
ADS8325
SBAS226C – MARCH 2002 – REVISED AUGUST 2007
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION
(1)
MAXIMUM
INTEGRAL NO MISSING SPECIFIED
LINEARITY CODES ERROR PACKAGE- PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT MEDIA,
PRODUCT ERROR (LSB) (LSB)
(2)
LEAD DESIGNATOR RANGE MARKING NUMBER QUANTITY
ADS8325IDGKT Tape and Reel, 250
ADS8325I ± 6 15 MSOP-8 DGK – 40 ° C to +85 ° C B25
ADS8325IDGKR Tape and Reel, 2500
ADS8325IBDGKT Tape and Reel, 250
ADS8325IB ± 4 16 MSOP-8 DGK – 40 ° C to +85 ° C B25
ADS8325IBDGKR Tape and Reel, 2500
ADS8325IDRBT Tape and Reel, 250
ADS8325I ± 6 15 SON-8 DRB – 40 ° C to +85 ° C B25
ADS8325IDRBR Tape and Reel, 2500
ADS8325IBDRBT Tape and Reel, 250
ADS8325IB ± 4 16 SON-8 DRB – 40 ° C to +85 ° C B25
ADS8325IBDRBR Tape and Reel, 2500
(1) For the most current specifications and package information, refer to our web site at www.ti.com .
(2) No Missing Codes Error specifies a 5V power supply and reference voltage.
Over operating free-air temperature range (unless otherwise noted)
ADS8325 UNIT
Supply voltage, DGND to V
DD
– 0.3 to 6 V
Analog input voltage
(2)
– 0.3 to V
DD
+ 0.3 V
Reference input voltage
(2)
– 0.3 to V
DD
+ 0.3 V
Digital input voltage
(2)
– 0.3 to V
DD
+ 0.3 V
Input current to any pin except supply – 20 to 20 mA
Power dissipation See Dissipation Rating Table
T
J
Operating virtual junction temperature range – 40 to +150 ° C
T
A
Operating free-air temperature range – 40 to +85 ° C
T
STG
Storage temperature range – 65 to +150 ° C
Lead temperature 1,6 mm (1/16 inch) from case for 10 sec +260 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions of extended periods may affect device reliability.
(2) All voltage values are with respect to ground terminal.
DERATING FACTOR T
A
≤ +25 ° C T
A
= +70 ° C T
A
= +85 ° C
PACKAGE R
θ JC
R
θ JA
ABOVE T
A
= +25 ° C POWER RATING POWER RATING POWER RATING
DGK 39.1 ° C/W 206.3 ° C/W 4.847mW/ ° C 606mW 388mW 315mW
DRB 5 ° C/W 45.8 ° C/W 3.7mW/C 370mW 204mW 148mW
2 Submit Documentation Feedback Copyright © 2002 – 2007, Texas Instruments Incorporated
Product Folder Link(s): ADS8325