Datasheet

ADS8317
SBAS356D –JUNE 2007–REVISED OCTOBER 2009 .................................................................................................................................................... www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
MAXIMUM NO
INTEGRAL MISSING
LINEARITY CODES SPECIFIED TRANSPORT
ERROR ERROR PACKAGE- PACKAGE TEMPERATURE PACKAGE ORDERING MEDIA,
PRODUCT (LSB)
(2)
(LSB) LEAD DESIGNATOR RANGE MARKING NUMBER QUANTITY
ADS8317IDGKT Tape and Reel, 250
ADS8317I ±2 16 MSOP-8 DGK –40°C to +85°C D17
ADS8317IDGKR Tape and Reel, 2500
ADS8317IBDGKT Tape and Reel, 250
ADS8317IB ±1.5 16 MSOP-8 DGK –40°C to +85°C D17
ADS8317IBDGKR Tape and Reel, 2500
ADS8317IDRBT Tape and Reel, 250
ADS8317I ±2 16 SON-8 DRB –40°C to +85°C D17
ADS8317IDRBR Tape and Reel, 2500
ADS8317IBDRBT Tape and Reel, 250
ADS8317IB ±1.5 16 SON-8 DRB –40°C to +85°C D17
ADS8317IBDRBR Tape and Reel, 2500
(1) For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet, or see
the TI website at www.ti.com.
(2) Maximum Integral Linearity Error specifies a 5V power supply and 2.5V reference voltage.
ABSOLUTE MAXIMUM RATINGS
(1)
Over operating free-air temperature range (unless otherwise noted).
ADS8317 UNIT
Supply voltage, V
DD
to GND –0.3 to +7 V
Analog input voltage
(2)
–0.3 to V
DD
+ 0.3 V
Reference input voltage
(2)
–0.3 to V
DD
+ 0.3 V
Digital input voltage
(2)
–0.3 to V
DD
+ 0.3 V
Input current to any pin except supply –20 to +20 mA
Power dissipation See Dissipation Ratings Table
Operating virtual junction temperature range, T
J
–40 to +150 °C
Operating free-air temperature range, T
A
–40 to +85 °C
Storage temperature range, T
STG
–65 to +150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to ground terminal.
DISSIPATION RATINGS
DERATING
FACTOR ABOVE T
A
≤ +25°C T
A
= +70°C T
A
= +85°C
PACKAGE R
θ JC
R
θ JA
T
A
= +25°C POWER RATING POWER RATING POWER RATING
DGK +39.1°C/W +206.3°C/W 4.847mW/°C 606mW 388mW 315mW
DRB +5°C/W +45.8°C/W 3.7mW/°C 370mW 204mW 148mW
2 Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS8317