Datasheet

Using the ADS8028EVM-PDK with ADCPro

www.ti.com

4.2 Channel Selection Tab

The ADS8028 can acquire data from one to eight channels, sequentially. The Channel Select tab provides

the control to select which channels are sampled. A channel is selected to be sampled if a check mark is

seen in the box corresponding to the channel number. Channels are listed sequentially, starting with

channel 0 (AIN0) at the top of the list and channel 7 (AIN7) at the bottom. Figure 9 shows where to select

channels in the Channel Select tab.

Figure 9. ADCPro: Channel Selection Tab

NOTE: If multiple channels are selected for acquisition, then each channel is sampled at a slower

rate, given by the sampling rate divided by the number of channels selected for acquisition.

4.3 Controls Tab

The Controls tab allows for reference source selection and operation of the ADS8028 internal temperature

sensor. Figure 10 highlights the controls the user can modify on the Controls tab.

Figure 10. ADCPro: Controls Tab

ADS8028EVM-PDK SBAU198–April 2012

Submit Documentation Feedback