Datasheet

Evaluating Performance with the ADCPro Software www.ti.com
8.1.2 Other Tab
The ADS7953 requires a clock to operate. The maximum frequency is selected by default for the different
operating modes, providing the maximum 1MSPS throughput rate specified in the datasheet.
The clock setting can be modified in this tab by accepting the default SPI or clock stop mode, a
continuous clock mode with the fastest possible serial clock, or a continuous clock mode with a variable
frequency.
The analog input range can also be specified in this tab as well as the contents of the four MSBs of
channel data (GPIO status or Channel Address of the conversion results).
Figure 21. Serial Clock, Input Range and MS Nibble settings
22
ADS79xxEVM and ADS79xxEVM-PDK SLAU262C– January 2009– Revised May 2011
Submit Documentation Feedback
Copyright © 2009–2011, Texas Instruments Incorporated