Datasheet

ADS7945
ADS7946
SBAS539B –JUNE 2011– REVISED SEPTEMBER 2011 www.ti.com
ELECTRICAL CHARACTERISTICS: ADS7946 (Single-Ended) (continued)
Minimum/maximum specifications at T
A
= –40°C to +125°C, AVDD = 2.7 V to 5.25 V, DVDD = 1.65 V to AVDD,
and f
SAMPLE
= 2 MSPS, unless otherwise noted.
Typical specifications at T
A
= +25°C, AVDD = 5 V, DVDD = 1.8 V, and f
SAMPLE
= 2 MSPS.
PARAMETER TEST CONDITIONS MIN TYP MAX UNITS
POWER-SUPPLY REQUIREMENTS
AVDD 2.7 3.3 5.25 V
DVDD 1.65 3.3 AVDD V
AVDD = 3.3 V, f
SAMPLE
= 2 MSPS 3.5 4 mA
I
DYNAMIC
AVDD = 5 V, f
SAMPLE
= 2 MSPS 4 5 mA
AVDD supply current
AVDD = 3.3 V, SCLK off 2.3 mA
I
STATIC
AVDD = 5 V, SCLK off 2.5 3 mA
DVDD = 3.3 V, f
SAMPLE
= 2 MSPS,
DVDD supply current
(8)
750 µA
SDO load 20 pF
I
PD-DYNAMIC
SCLK = 40 MHz 550 µA
Power-down state
AVDD supply current
I
PD-STATIC
SCLK off 2.5 µA
Power-up time From power-down state using PDEN pin 1 µs
TEMPERATURE RANGE
Specified performance –40 +125 °C
(8) DVDD consumes only dynamic current. I
DVDD
= C
LOAD
× DVDD × number of 0→1 transitions in SDO × f
SAMPLE
.
This is a load-dependent current and there is no DVDD current when the output is not toggling.
THERMAL INFORMATION
ADS7945/6
THERMAL METRIC
(1)
RTE UNITS
16 PINS
θ
JA
Junction-to-ambient thermal resistance 54.3
θ
JCtop
Junction-to-case (top) thermal resistance 53.7
θ
JB
Junction-to-board thermal resistance 19.2
°C/W
ψ
JT
Junction-to-top characterization parameter 0.3
ψ
JB
Junction-to-board characterization parameter 14.5
θ
JCbot
Junction-to-case (bottom) thermal resistance 5.2
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
6 Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated
Product Folder Link(s): ADS7945 ADS7946