Datasheet

ADS7924EVM-PDK Kit Operation www.ti.com
6. Switch the BSL switch (SW4) on the MMB3 to the BSL position (to the left) as instructed, then press
OK. The plug-in will download the firmware to the MMB3. This operation may take a couple of
minutes, so the progress is updated in the message at the top of the ADS7924 plug-in window (as
Figure 12 shows). The firmware is saved in flash memory on the MMB3, so this operation should need
to only be performed once.
Figure 12. Firmware Download Progress Indicator
14
ADS7924EVM and ADS7924EVM-PDK User's Guide SBAU173–June 2010
Copyright © 2010, Texas Instruments Incorporated