Datasheet

www.ti.com

ADS7924EVM-PDK Kit Operation

3. If the plug-in cannot connect to the EVM, you will see a window as shown in Figure 9. This message

indicates that the autoscan process for an available COM port has failed, giving you several different

options.

Figure 9. EVM COM Port Autoscan Prompt Window

4. If the Rescan option is unsuccessful, you can manually set the COM port to connect to the EVM. The

Manual COM Port selection window is shown in Figure 10.

Figure 10. Manual COM Port Selection Window

5. The plug-in will detect whether or not the board has the correct firmware loaded. The first time you use

the ADS7924EVM-PDK, the firmware for the MMB3 may need to be downloaded to the MMB3. If the

firmware must be loaded, you will see a screen as shown in Figure 11.

Figure 11. Firmware Download Message

SBAU173–June 2010 ADS7924EVM and ADS7924EVM-PDK User's Guide