Datasheet


SBAS124C − DECEMBER 1999 − REVISED DECEMBER 2005
www.ti.com
2
ORDERING INFORMATION
(1)
PRODUCT PACKAGE-LEAD
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT MEDIA,
QUANTITY
ADS7870
SSOP-28 Surface Mount
DB
−40°C to +85°C
ADS7870 ADS7870IDB Rails, 48
ADS7870 SSOP-28 Surface Mount DB −40°C to +85°C
ADS7870 ADS7870IDBR Tape and Reel, 1000
(1)
For the most current package and ordering information, see the Package Option Addendum at the end of this data sheet, or see the TI web
site at www.ti.com.
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate
precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to
damage because very small parametric changes could cause the device not to meet its published specifications.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted
(1)
UNIT
Supply voltage, V
DD
5.5 V
Input current
Momentary 100 mA
Analog inputs
Input current
Continuous 10 mA
Analog inputs
Input voltage V
DD
+ 0.5 V to GND − 0.5 V
Operating free-air temperature range, T
A
−40°C to 85°C
Storage temperature range, T
STG
−65°C to 150°C
Junction temperature (T
J
max) 150°C
Lead temperature, soldering (10 sec) 300°C
(1)
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.