Datasheet

www.ti.com
6.2 Quick Start
Kit Operation
Ensure that the ADS7845EVM is installed on the USB-MODEVM Interface Board. The ADS7845EVM
should be installed in the topmost position, using J11, J12, and J13 on the USB-MODEVM.
Place the CD-ROM into your PC CD-ROM drive. Locate the Setup program on the disk and execute it.
The Setup program installs the ADS7845 evaluation software on your PC. Follow the instructions and
prompts given.
After the main program is installed, a dialog box appears with instructions for installing NI-VISA 3.2
Runtime, a self-extracting archive. Click OK to proceed. A WinZip™ dialog appears. Click Unzip, and the
archive extracts itself and automatically runs the NI-VISA™ 3.2 Runtime installer.
Follow the instructions in the NI-VISA 3.1 Runtime Installer. When prompted for which features to install,
do the following:
1. Click on the disk icon next to NI-VISA 3.2
2. Select, Do not install this feature.
3. Click on the disk icon next to USB.
4. Select the option which installs this feature.
5. Click Next.
Accept the license agreement, and continue the installation.
When the installation completes, click Finish on the ADS7845EVM installer window. You may be prompted
to restart your computer.
When installation is complete, attach a USB cable from your PC to the USB-MODEVM Interface Board. As
configured at the factory, the board will be powered from the USB interface, so the power indicator LEDs
on the USB-MODEVM should light. Once this occurs, launch the ADS7845 evaluation software on your
PC.
SBAU122 – March 2006 ADS7845EVM and ADS7845EVM-PDK 7
Submit Documentation Feedback