Datasheet

ADS6445, ADS6444
ADS6443, ADS6442
SLAS531B MAY 2007REVISED DECEMBER 2009
www.ti.com
CAPTURE TEST PATTERNS
ADS644X outputs the bit clock (DCLK), positioned nearly at the center of the data transitions. It is recommended
to route the bit clock, frame clock and output data lines with minimum relative skew on the PCB. This ensures
sufficient setup/hold times for a reliable capture by the receiver.
The DESKEW is a 1010... or 0101... pattern output on the serial data lines that can be used to verify if the
receiver capture clock edge is positioned correctly. This may be useful in case there is some skew between
DCLK and serial data inside the receiver. Once deserialized, it is required to ensure that the parallel data is
aligned to the frame boundary. The SYNC test pattern can be used for this. For example, in the 1-wire interface,
the SYNC pattern is 7 '1's followed by 7 '0's (from MSB to LSB). This information can be used by the receiver
logic to shift the deserialized data till it matches the SYNC pattern.
In addition to DESKEW and SYNC, the ADS644X includes other test patterns to verify correctness of the capture
by the receiver such as all zeros, all ones and toggle. These patterns are output on all four channel data lines
simultaneously. Some patterns like custom and sync are affected by the type of interface selected, serialization
and bit order.
Table 25. Test Patterns
PATTERN DESCRIPTION
All zeros Outputs logic low.
All ones Outputs logic high.
Outputs toggle pattern - <D13-D0> alternates between 10101010101010 and
Toggle
01010101010101 every clock cycle.
Outputs a 14-bit custom pattern. The 14-bit custom pattern can be specified into two
Custom serial interface registers. In the 2-wire interface, each code is sent over the 2 wires
depending on the serialization and bit order.
Sync Outputs a sync pattern.
Outputs deskew pattern. Either <D13-D0> = 10101010101010 or <D11-D0> =
Deskew
01010101010101 every clock cycle.
Table 26. SYNC Pattern
INTERFACE
SERIALIZATION SYNC PATTERN ON EACH WIRE
OPTION
14 X MSB-11111110000000-LSB
1-Wire
16 X MSB-111111111000000000-LSB
14 X MSB-1111000-LSB
2-Wire
16 X MSB-11110000-LSB
66 Submit Documentation Feedback Copyright © 2007–2009, Texas Instruments Incorporated
Product Folder Link(s): ADS6445, ADS6444 ADS6443, ADS6442