Datasheet

www.ti.com
Input Common-Mode
Fs
180 A x
125 MSPS
m
(1)
REFERENCE
VCM
REFM
REFP
INTREF
INTREF
EXTREF
INTERNAL
REFERENCE
1kW
4kW
Internal Reference
External Reference
Full−scale differential input pp + (Voltage forced on VCM) 1.33
(2)
ADS6125, ADS6124
ADS6123, ADS6122
SLAS560A OCTOBER 2007 REVISED MARCH 2008
To ensure a low-noise common-mode reference, the VCM pin is filtered with a 0.1- µ F low-inductance capacitor
connected to ground. The VCM pin is designed to directly drive the ADC inputs. The input stage of the ADC
sinks a common-mode current in the order of 180 µ A (at 125 MSPS). Equation 1 describes the dependency of
the common-mode current and the sampling frequency.
Equation 1 helps to design the output capability and impedance of the CM driving circuit.
ADS612X has built-in internal references REFP and REFM, requiring no external components. Design schemes
are used to linearize the converter load seen by the references; this and the integration of the requisite reference
capacitors on-chip eliminates the need for external decoupling. The full-scale input range of the converter is
controlled in the external reference mode as explained below. The internal or external reference modes can be
selected by programming the serial interface register bit <REF> (seeTable 5 ).
Figure 96. Reference Section
When the device is in internal reference mode, the REFP and REFM voltages are generated internally.
Common-mode voltage (1.5 V nominal) is output on VCM pin, which can be used to externally bias the analog
input pins.
When the device is in external reference mode, the VCM acts as a reference input pin. The voltage forced on the
VCM pin is buffered and gained by 1.33 internally, generating the REFP and REFM voltages. The differential
input voltage corresponding to full-scale is given by Equation 2 .
In this mode, the 1.5 V common-mode voltage to bias the input pins has to be generated externally. There is no
change in performance compared to internal reference mode.
Copyright © 2007 2008, Texas Instruments Incorporated Submit Documentation Feedback 45
Product Folder Link(s): ADS6125, ADS6124 ADS6123, ADS6122