Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
ADS6125, ADS6124
ADS6123, ADS6122
SLAS560A – OCTOBER 2007 – REVISED MARCH 2008
PACKAGE/ORDERING INFORMATION
(1)
SPECIFIED
PACKAGE- PACKAGE PACKAGE ORDERING
PRODUCT TEMPERATURE TRANSPORT MEDIA
LEAD DESIGNATOR MARKING NUMBER
RANGE
ADS6125IRHBT Tape and Reel, small
ADS6125 QFN-32
(2)
RHB – 40 ° C to 85 ° C AZ6125
ADS6125IRHBR Tape and Reel, large
ADS6124IRHBT Tape and Reel, small
ADS6124 QFN-32
(2)
RHB – 40 ° C to 85 ° C AZ6124
ADS6124IRHBR Tape and Reel, large
ADS6123IRHBT Tape and Reel, small
ADS6123 QFN-32
(2)
RHB – 40 ° C to 85 ° C AZ6123
ADS6123IRHBR Tape and Reel, large
ADS6122IRHBT Tape and Reel, small
ADS6122 QFN-32
(2)
RHB – 40 ° C to 85 ° C AZ6122
ADS6122IRHBR Tape and Reel, large
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com .
(2) For thermal pad size on the package, see the mechanical drawings at the end of this data sheet. θ
JA
= 34 ° C/W (0 LFM air flow),
θ
JC
= 30 ° C/W when used with 2 oz. copper trace and pad soldered directly to a JEDEC standard four layer 3 in × 3 in (7.62 cm ×
7.62 cm) PCB.
VALUE UNIT
Supply voltage range, AVDD – 0.3 to 3.9 V
V
I
Supply voltage range, DRVDD – 0.3 to 3.9 V
Voltage between AGND and DRGND – 0.3 to 0.3 V
Voltage between AVDD to DRVDD – 0.3 to 3.3 V
Voltage applied to VCM pin (in external reference mode) – 0.3 to 2 V
Voltage applied to analog input pins, INP and INM – 0.3 to minimum ( 3.6, AVDD + 0.3) V
Voltage applied to analog input pins, CLKP and CLKM – 0.3 to (AVDD + 0.3) V
T
A
Operating free-air temperature range – 40 to 85 ° C
T
J
Operating junction temperature range 125 ° C
T
stg
Storage temperature range – 65 to 150 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
Copyright © 2007 – 2008, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): ADS6125, ADS6124 ADS6123, ADS6122