Datasheet
www.ti.com
Software Control
Figure 7. ADS58H4x SNRBoost/Burst Mode Panel
2.2.2 Register Control
• Send All: Sends the register configuration to all devices
• Save Regs: Saves the register configuration for all devices
• Load Regs: Load a register file for all devices.
– Select Load Regs button
– Double click on the data folder
– Double click on the desired register file
– Click Send All, ensuring all of the values are loaded properly
2.2.3 Miscellaneous Settings
• Reset USB: Toggle this button if the USB port is not responding. This generates a new USB handle
address
Note: Reset the board after every power cycle and click the Reset USB button on the GUI
• Exit: Stops the program
9
SLAU455A–August 2012–Revised October 2012 ADS58H4x (ADS58H40/ADS58H43) EVM
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated