Datasheet

www.ti.com Software Control
Figure 4. ADS58C48 GUI – Advanced Level
1.2.3 Register Control
● Send All: Sends all the register configurations on the panel to the device
● Read All: Reads register configuration from device
● Save Regs: Saves the register configuration to text file
● Load Regs: Loads a register file from a text file. After load register the relative switches and
selecting boxes are automatically updated.
— Select Load Regs button.
— Double click on the data folder.
— Double click on the desired register file.
— Click on Send All to ensure all the values are loaded properly.
1.2.4 Misc Settings
● Reset USB: Toggle this button if the USB port is not responding. This generates a new USB
handle address
● Exit: Stops the program
5
SLAU313–May 2010 ADS58C48EVM
Copyright © 2010, Texas Instruments Incorporated