Datasheet

Software Control

www.ti.com

Figure 3. ADS58C48 GUI Front Panel – Top Level

1.2.2 Advanced Level

Click on the "Advanced" tab on the GUI to bring the advanced panel to the front. On this panel, a user can

write address and code of the register into the address/code boxes (shown as Figure 4) then press Enter

on the key board or "Send All" button on the panel to send address and code to ADC. The address and

code will be shown on the display box located at the right side of the panel when it is sent to ADC.

Additional settings on advanced panel can be used to set output offset functions and pin overwrite, as well

as virtual LEDs to indicate the custom test pattern.

ADS58C48EVM SLAU313–May 2010