Datasheet

www.ti.com

Introduction

1.4 EVM Solder Options

Figure 4. EVM Solder Options

Table 1 lists the jumper options of the EVM by category, the default position of the jumper, and a

description of what the jumper does in the possible positions that the jumper might be set. Three pin

jumpers have an indication of pin 1 position both in Figure 2 and in the silkscreen on the top of the EVM

itself. A jumper installed between pins 1 and 2 is designated by 1-2 while a jumper installed between pins

2 and 3 is designated by 2-3. For more detailed information on the function of each jumper position,

consult the ADS540x datasheet.

SLAU450–July 2012 ADS540x and ADS54T0x Evaluation Module (EVM)

Submit Documentation Feedback