Datasheet
www.ti.com
Power Up ADS5292
Figure 3. HW Setup With Connection Between TSW1250EVM and ADS5292EVM
5 Power Up ADS5292
After connecting the ADS5292EVM to the TSW1250 using the P10 connector, +6-V adapter to
TSW1250EVM, and +5 V (from the external power supply) to P1 connector, then power up is complete.
Three green LEDs and one orange LED turned on as shown in Figure 4 (also see Figure 13).
7
SLAU377–October 2011 ADS5292, 8-Channel, Analog-to-Digital Converter Evaluation Module
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated