Datasheet

Test Setup

www.ti.com

browse button. Once the file path has been entered in the box, click Next to proceed.

• If Windows™ XP is configured to warn when unsigned (non-WHQL certified) drivers are about to be

installed, the following screen is displayed unless installing a Microsoft™ WHQL-certified Driver. Click

on Continue Anyway to continue with the installation. If Windows XP is configured to ignore file

signature warnings, no message appears.

4 Test Setup

To evaluate the ADS5292 device, a TSW1250EVM is required. Figure 3 shows the exact setup of these

two boards and external connectors.

• Connect +5-V supply at P1 connector or across TP_VP (+5V) and TP2 (GND).

• Connect USB cable from PC to USB1 on ADS5292EVM.

• Connect ADS5292EVM to TSW1250EVM using P10 connector.

• Connect USB cable from PC to USB port J8 of TSW1250EVM.

• Connect +6-V wall adapter to TSW1250EVM at J7 connector.

For the default configuration as shown in Figure 2, it is unnecessary to have an external sampling clock.

The onboard CMOS clock oscillator is used.

ADS5292, 8-Channel, Analog-to-Digital Converter Evaluation Module SLAU377–October 2011

Submit Documentation Feedback