Datasheet

TP_VP

TP2

USB1

JP5

JP6

JP4

JP16

JP18

JP20

JP13

JP19

Default Configuration

www.ti.com

2 Default Configuration

Figure 2. ADS5292EVM Basic Configuration

1. The ADS5292EVM basic configuration uses the onboard single-ended clock as the default option. See

Section 9.2 for the ADC clock, various-mode jumper settings.

2. P1: +5-V Power supplies the connector.

3. JP4, JP5, and JP6 are set to enable +3.3V Analog, +1.8VD Digital, and +1.8VA Analog to device,

respectively.

4. JP13: Enable onboard CMOS clock.

5. JP16, JP18, JP19, JP20: ADC clock source selection jumpers.

3 Software Installation and Operation

The ADS5292EVM comes with a software installation CD; run setup.exe to install the software.

ADS5292, 8-Channel, Analog-to-Digital Converter Evaluation Module SLAU377–October 2011

Submit Documentation Feedback