Datasheet

www.ti.com

Quick View of Evaluation Setup

1 Quick View of Evaluation Setup

Figure 1 shows an overview of the evaluation setup that includes the ADS5292EVM evaluation module

(EVM), TSW1250EVM, external equipment, personal computer (PC), and software requirements.

Figure 1. Evaluation Setup

TSW1250EVM: The high-speed LVDS de-serializer board is required for capturing data from the

ADS5292EVM and its analysis using the TSW1250 graphical user interface (GUI).

For more information pertaining to be TSW1250EVM, see:

http://focus.ti.com/docs/toolsw/folders/print/tsw1250evm.html.

Equipment: Signal generators (with low-phase noise) must be used as source of input signal and clock

(optional) in order to get the desired performance. Additionally, band-pass filters (BPF) are required in

signal and clock (optional) paths to attenuate the harmonics and noise from the generators.

Power Supply: A single +5-V supply powers the ADS5292EVM. The supplies for the ADS5292 device are

derived from the +5-V supply. The power supply must be able to source up to 1.5 A. A +6-V supply can

power the TSW1250EVM using a wall adapter.

USB Interface to PC: The USB connection from the ADS5292EVM and TSW1250EVM to the personal

computer (PC) must be set up; Section 3.2 explains the USB driver installation.

ADS5292GUI: Section 3.1 explains the GUI installation procedure and its operation.

SLAU377–October 2011 ADS5292, 8-Channel, Analog-to-Digital Converter Evaluation Module

Submit Documentation Feedback