Datasheet

www.ti.com

TEST ADS5292

• From ADS5292 GUI, go to Test Pattern page, then select RAMP PATTERN.

Figure 8. ADS5292 Test Pattern

• Press Capture button on TSW1250 GUI. You observe a ramping waveform on the TSW1250 GUI

display area as shown in Figure 9.

• Repeat for Channel 2...Channel 8.

• If each channel has the output as shown in the following illustration, you can proceed with the

next step; otherwise, contact the TI FAE (Field Application Engineer) to troubleshoot the

problem.

• On the ADS5292 GUI, change Test Pattern to None from RAMP PATTERN for next step.

SLAU377–October 2011 ADS5292, 8-Channel, Analog-to-Digital Converter Evaluation Module

Submit Documentation Feedback