Datasheet

Software Control www.ti.com
Figure 2. ADS58C28-Only GUI Panel
1.2.3 Register Control
● Send All: Sends all the register configurations on the panel to the device.
● Read All: Not active.
● Save: Saves the register configuration to text file.
● Load: Loads a register file from a text file. After load register, the relative switches and
selecting boxes are automatically updated.
o Select the Load button.
o Double click on the desired register file.
o Clicking Send All ensures all of the values are loaded properly.
1.2.4 Miscellaneous Settings
● Device Selection: Select ADS58C28 or ADS42xx for proper operation.
● Reset USB: Toggle this button if the USB port is not responding. This generates a new USB
handle address.
● Show USB Port: Allows user to change USB port configuration. Default setting is appropriate for
the EVM RevB.
● Exit: Stops the program
4
ADS42xx EVM SLAU333A–March 2011–Revised June 2013
Submit Documentation Feedback
Copyright © 2011–2013, Texas Instruments Incorporated