Datasheet

11 About the MMB0
11.1 Connecting the Power Supply
11.1.1 Connecting an AC Adapter
www.ti.com About the MMB0
The MMB0 is a Modular EVM System motherboard. It is designed around the TMS320VC5507 , a DSP
from Texas Instruments that has an onboard USB interface. The MMB0 also has 16MB of SDRAM
installed.
The MMB0 is not sold as a DSP development board, and it is not available separately. TI cannot offer
support for the MMB0 except as part of an EVM kit. For schematics or other information about the MMB0,
contact Texas Instruments.
The ADS1672EVM-PDK can be operated with a unipolar +5V supply.
When the MMB0 DSP is powered properly, LED D2 glows green. The green light indicates that the 3.3V
supply for the MMB0 is operating properly; however, it does not indicate that the EVM power supplies are
operating properly.
An ac adapter can be connected to barrel jack J2 on the MMB0. J2 is located next to the USB connector.
The adapter must output 6V to 7V dc. The connector must be sleeve-negative, tip-positive and it should
have a current rating of at least 2A.
Jumper J12 on the MMB0 connects a wall-mounted power supply to the board. To use the wall-mount
supply, J12 must be shorted. Figure 11 illustrates how to connect an ac adapter to the MMB0.
Figure 11. Connecting an AC Adapter
SBAU147 – March 2009 ADS1672EVM and ADS1672EVM-PDK User's Guide 15
Submit Documentation Feedback