Datasheet

ADS1672EVM-PDK Kit Operation www.ti.com
3. Plug the ADS1672EVM into the MMB0 as Figure 10 illustrates.
Figure 10. Connecting ADS1672EVM to MMB0
CAUTION
Do not misalign the pins when plugging the ADS1672EVM into the MMB0.
Check the pin alignment carefully before applying power to the PDK.
Step 3. Set the jumpers and switches on the ADS1672EVM as shown in Figure 8 (note that these
settings are the factory-configured settings for the EVM).
ADS1672EVM and ADS1672EVM-PDK User's Guide14 SBAU147 – March 2009
Submit Documentation Feedback