Datasheet

Temperature ( C)° =
0.1447 0.145300-
0.00049
+ 25 = 23.78 C°
USING THE SOFTWARE www.ti.com
The number 0.1447 V (on the y-axis) can be calculated as a temperature using Equation 2:
(2)
4.5.1 MV
DD
Input and the Scope Tab
The MV
DD
input option allows the measurement of the supply voltage V
S
= (AVDD + AVSS) / 2 for
channels 1, 2, 5, 6, 7, and 8; however, the supply voltage for channel 3 is DVDD / 2.
4.6 General-Purpose I/O Register (GPIO)
The GPIO registers control four general-purpose input and output (I/O) pins. Table 9 shows the respective
register to control these pins. Figure 19 illustrates the GPIO Control Register GUI panel.
Table 9. GPIO: General-Purpose I/O Register
Reset
Address Register Value Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
14h GPIO 0Fh GPIOD4 GPIOD3 GPIOD2 GPIOD1 GPIOC4 GPIOC3 GPIOC2 GPIOC1
Figure 19. GPIO Control Register GUI Panel
20
Performance Demonstration Kit for the ADS131E08 SBAU200–June 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated