Datasheet

www.ti.com

SOFTWARE INSTALLATION

2.2 Installing the Software

CAUTION

Do not connect the ADS130E08EVM hardware before installing the software on

a suitable PC. Failure to observe this caution may cause Microsoft Windows to

not recognize the ADS130E08EVM.

Download the latest software from the TI website at www.ti.com/tool/ADS130E08EVM-PDK. To install the

ADS130E08 software, unzip and run setup.exe. Figure 3 shows the initialization screen.

Figure 3. Initialization of ADS130E08EVM GUI

You must accept the two license agreements shown in Figure 4 and Figure 5 before the installation can

proceed.

Figure 4. License 1 Figure 5. License 2

2.3 Installing the ADS130E08EVM-PDK Hardware Drivers

2.3.1 Installing the First USB Driver

Apply power to the MMB0 using the supplied wall-mount power supply and connect the MMB0 to your PC

through any available USB port. The Found New Hardware Wizard window appears, as shown in

Figure 6. Note that this is the first of two USB drivers that are installed. Click Next to continue driver

installation.

SBAU202–June 2012 Performance Demonstration Kit for the ADS130E08

Submit Documentation Feedback