Datasheet

USING THE SOFTWARE

www.ti.com

4.7 Fault Status Registers (FAULT_STATP and FAULT_STAIN)

The Fault Status registers store the status of whether the positive and/or negative input on each channel

has a fault. This is a convenient feature to help pinpoint if any of the inputs are out of range. The GUI for

this feature is enabled by clicking in the upper right-hand corner of the EVM software on the Show/Poll

Fault Status button, as shown in Figure 20.

Figure 20. Fault Status Indicator

Performance Demonstration Kit for the ADS130E08 SBAU202–June 2012

Submit Documentation Feedback