Datasheet

ADS1299
www.ti.com SBAS499A –JULY 2012–REVISED AUGUST 2012
CONFIG4: Configuration Register 4
Address = 17h
BIT 7 BIT 6 BIT 5 BIT 4 BIT 3 BIT 2 BIT 1 BIT 0
0 0 0 0 SINGLE_SHOT 0 PD_LOFF_COMP 0
Bits[7:4] Must always be set to '0'
Bit 3 SINGLE_SHOT: Single-shot conversion
This bit sets the conversion mode.
0 = Continuous conversion mode (default)
1 = Single-shot mode
Bit 2 Must always be set to '0'
Bit 1 PD_LOFF_COMP: Lead-off comparator power-down
This bit powers down the lead-off comparators.
0 = Lead-off comparators disabled (default)
1 = Lead-off comparators enabled
Bit 0 Must always be set to '0'
Copyright © 2012, Texas Instruments Incorporated Submit Documentation Feedback 47
Product Folder Link(s): ADS1299