Datasheet

Overview

www.ti.com

Figure 1. ADS1299EEG-FE Kit

The complete kit includes the following items:

• ADS1299EEG FE printed circuit board (PCB), Rev A

• MMB0 (Modular EVM motherboard, Rev D or higher)

• Universal ac to dc wall adapter, 120V to 240V ac to +6V dc

2.5 Factory Default Jumper Settings

Table 1. Factory Default Jumper Settings

Jumper Name Settings Comment

JP1 Not Installed Used for programmable bias drive.

JP2 2-3 Unipolar analog supply (AVDD = 5V)

JP3 Not Installed Related to external reference generation circuitry

JP4 1-2 5V supply to board

JP5 Not Installed Option to provide hardware PWDN signal.

JP6 1-2 BIAS_ELEC to onboard midsupply

JP7 1-2 Route REF_ELEC to buffer input (buffer output is not used by default)

JP8 1-2 Route REF_ELEC directly to SRB1

JP17 Not Installed Related to shield drive circuitry

JP18 2-3 Clock from Oscillator on the EVM

JP19 1-2 Power for Oscillator on the EVM

JP20 1-2 Unipolar supply (AVSS = 0V)

JP21 1-2

JP22 2-3

JP23 1-2 CLKSEL = 0

JP24 2-3 Digital supply (DVDD =3.3)

EEG Front-End Performance Demonstration Kit SLAU443–May 2012

Submit Documentation Feedback