Datasheet

www.ti.com

Bill of Materials, Layouts and Schematics

9.4 ADS1299EEG-FE Power-Supply Recommendations

Figure 70 shows a +6V power-supply cable (not provided in the EVM kit) connected to a battery pack with

four 1.5V batteries connected in series. Connecting to a wall-powered source (provided in the EVM kit)

makes the ADS1299EEG-FE more susceptible to 50Hz/60Hz noise pickup; therefore, for best

performance, it is recommended to power the ADS1299EEG-FE with a battery source. This configuration

minimizes the amount of noise pickup seen at the digitized output of the ADS1299.

Figure 70. Recommended Power Supply for ADS1299EEG-FE

SLAU443–May 2012 EEG Front-End Performance Demonstration Kit

Submit Documentation Feedback