Datasheet

ADS1293

www.ti.com

SNAS602B –FEBRUARY 2013–REVISED MARCH 2013

Table 40. ERROR_RANGE2: Channel 2 AFE Out-of-Range Status

Addr BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0

0x1B SDM_ OR_CH2 SIGN_CH2 OUTN_ OUTN_ OUTP_ OUTP_ DIF_HIGH_

LOW_CH2 HIGH_CH2 LOW_CH2 HIGH_CH2 CH2

[7] RESERVED —

[6] SDM_OR_CH2 Channel 2 sigma-delta modulator over range

1: Indicates an over range detected for channel 2 SDM

[5] SIGN_CH2 Channel 2 instrumentation amplifier output sign

This bit specifies the sign of the output signal of the instrumentation amplifier for channel 2.

0: Positive output of INA larger than negative output

1: Positive output of INA smaller than negative output

[4 ] OUTN_LOW_CH2 Channel 2 instrumentation amplifier negative output near negative rail

1: Indicates the negative output of the INA is close to the negative rail for channel 2

[3] OUTN_HIGH_CH2 Channel 2 instrumentation amplifier negative output near positive rail

1: Indicates the negative output of the INA is close to the positive rail for channel 2

[2] OUTP_LOW_CH2 Channel 2 instrumentation amplifier positive output near negative rail

1: Indicates the positive output of the INA is close to the negative rail for channel 2

[1] OUTP_HIGH_CH2 Channel 2 instrumentation amplifier positive output near positive rail

1: Indicates the positive output of the INA is close to the positive rail for channel 2

[0] DIF_HIGH_CH2 Channel 2 instrumentation amplifier output out-of-range

1: Indicates the differential output voltage of the INA is out-of-range for channel 2

Note: The clock to digital (internal or external) must be enabled in 0x12[2] for this error register to update.

Product Folder Links: ADS1293