Datasheet

ADS1293
www.ti.com
SNAS602B FEBRUARY 2013REVISED MARCH 2013
ELECTRICAL CHARACTERISTICS
(1)
Unless otherwise noted, all limits are specified at T
A
= +25°C, +2.7V VDD +5.5V, +1.65V VDDIO MIN(+3.6V, VDD),
VREF = +2.4V, f
OSC
= 409.6kHz, 1µF low ESR capacitor between CVREF and GND, 0.1µF capacitor between RLDREF and
GND. Boldface limits apply for T
MIN
T
A
T
MAX
.
PARAMETER TEST CONDITIONS MIN
(2)
TYP
(3)
MAX
(2)
UNIT
POWER SUPPLY (VDD, VDDIO)
VDD Analog Supply Voltage 2.7 5.5 V
Power-down mode 80 125 µA
Stand-by mode 120 175 µA
1 chan, WILSON OFF, RLD OFF, CMDET OFF,
205 290
LOD OFF, low power
1 chan, WILSON OFF, RLD OFF, CMDET OFF,
335 490
LOD OFF, high-res
3 chan, WILSON OFF, RLD OFF, CMDET OFF,
IVDD Analog Supply Current
350 520
LOD OFF, low power
µA
3 chan, WILSON ON, RLD ON, CMDET ON, LOD
440 595
ON, low power, low cap-drive
3 chan, WILSON ON, RLD ON, CMDET ON, LOD
835 1120
ON, high-res, low cap-drive
3 chan, WILSON ON, RLD ON, CMDET ON, LOD
960 1300
ON, high-res, high cap-drive
VDDIO IO Supply Voltage VDD > 3.6V 1.65 3.6 V
VDD 3.6V 1.65 VDD V
IVDDIO Quiescent Current IO Supply 0.6 µA
ANALOG INPUTS (IN1-IN6)
T
A
= 25°C, LOD OFF ±175 pA
I
B
Input Bias Current
T
A
= 85°C, LOD OFF ±13 nA
RIN Differential Input Resistance 500 M
f = 400 MHz 92 dB
f = 900 MHz 107 dB
Electromagnetic Interference Rejection
EMIRR
Ratio, IN+, IN-, and VDD
f = 1.8 GHz 98 dB
f = 2.4 GHz 86 dB
(1) The Electrical Characteristics table lists specify specifications under the listed Recommended Operating Conditions except as otherwise
modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not
guaranteed.
(2) Datasheet min/max specification limits are specified by test, unless otherwise noted.
(3) Typical values represent the most likely parameter norms at T
A
= 25°C and at the Recommended Operation Conditions at the time of
product characterization and are not guaranteed.
Copyright © 2013, Texas Instruments Incorporated 5
Product Folder Links: ADS1293