Datasheet
3
®
ADS1286
ELECTROSTATIC
DISCHARGE SENSITIVITY
Electrostatic discharge can cause damage ranging from per-
formance degradation to complete device failure. Burr-
Brown Corporation recommends that all integrated circuits
be handled and stored using appropriate ESD protection
methods.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet
published specifications.
ABSOLUTE MAXIMUM RATINGS
(1)
+V
CC
..................................................................................................... +6V
Analog Input ....................................................... –0.3V to (+V
CC
+ 300mV)
Logic Input ......................................................... –0.3V to (+V
CC
+ 300mV)
Case Temperature ......................................................................... +100°C
Junction Temperature .................................................................... +150°C
Storage Temperature ..................................................................... +125°C
External Reference Voltage .............................................................. +5.5V
NOTE: (1) Stresses above these ratings may permanently damage the device.
PIN CONFIGURATION
1
2
3
4
8
7
6
5
+V
CC
DCLOCK
D
OUT
CS/SHDN
V
REF
+In
–In
GND
ADS1286
8-Pin Mini PDIP
8-Lead SOIC
PIN ASSIGNMENTS
PIN NAME DESCRIPTION
1V
REF
Reference Input.
2 +In Non Inverting Input.
3 –In Inverting Input. Connect to ground or remote ground sense point.
4 GND Ground.
5 CS/SHDN Chip Select when low, Shutdown Mode when high.
6D
OUT
The serial output data word is comprised of 12 bits of data. In operation the data is valid on the falling edge of DCLOCK. The
second clock pulse after the falling edge of CS enables the serial output. After one null bit the data is valid for the next 12 edges.
7 DCLOCK Data Clock synchronizes the serial data transfer and determines conversion speed.
8+V
CC
Power Supply.
PACKAGE
INTEGRAL TEMPERATURE DRAWING
PRODUCT LINEARITY RANGE PACKAGE NUMBER
(1)
ADS1286P ±20°C to +70°C Plastic DIP 006
ADS1286PK ±20°C to +70°C Plastic DIP 006
ADS1286PL ±10°C to +70°C Plastic DIP 006
ADS1286U ±20°C to +70°C SOIC 182
ADS1286UK ±20°C to +70°C SOIC 182
ADS1286UL ±10°C to +70°C SOIC 182
ADS1286PA ±2 –40°C to +85°C Plastic DIP 006
ADS1286PB ±2 –40°C to +85°C Plastic DIP 006
ADS1286PC ±1 –40°C to +85°C Plastic DIP 006
ADS1286UA ±2 –40°C to +85°C SOIC 182
ADS1286UB ±2 –40°C to +85°C SOIC 182
ADS1286UC ±1 –40°C to +85°C SOIC 182
PACKAGE/ORDERING INFORMATION
NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix
C of Burr-Brown IC Data Book.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN
assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject
to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not
authorize or warrant any BURR-BROWN product for use in life support devices and/or systems.