Datasheet


SBAS306F − NOVEMBER 2004 − REVISED OCTOBER 2007
www.ti.com
2
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted
(1)
ADS1271 UNIT
AVDD to AGND −0.3 to +6.0 V
DVDD to DGND −0.3 to +3.6 V
AGND to DGND −0.3 to +0.3 V
Input Current
100, Momentary mA
Input Current
10, Continuous mA
Analog Input to AGND −0.3 to AVDD + 0.3 V
Digital Input or Output to DGND −0.3 to DVDD + 0.3 V
Maximum Junction Temperature +150 °C
Operating Temperature Range −40 to +105 °C
Storage Temperature Range −60 to +150 °C
(1)
Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods
may degrade device reliability. These are stress ratings only, and
functional operation of the device at these or any other conditions
beyond those specified is not implied.
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be
handled with appropriate precautions. Failure to observe
proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to
complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
ORDERING INFORMATION
For the most current package and ordering information,
see the Package Option Addendum located at the end of
this data sheet, or refer to our web site at www.ti.com.