Datasheet

ADS1258-EP
SBAS445D –MARCH 2009– REVISED MARCH 2011 www.ti.com
PIN ASSIGNMENTS
ANALOG/DIGITAL
PIN # NAME INPUT/OUTPUT DESCRIPTION
1 AIN3 Analog Input Analog Input 3: Single-Ended Channel 3, Differential Channel 1 (–)
2 AIN2 Analog Input Analog Input 2: Single-Ended Channel 2, Differential Channel 1 (+)
3 AIN1 Analog Input Analog Input 1: Single-Ended Channel 1, Differential Channel 0 (–)
4 AIN0 Analog Input Analog Input 0: Single-Ended Channel 0, Differential Channel 0 (+)
Negative Analog Power Supply: 0V for unipolar operation, –2.5 V for bipolar operation.
5 AVSS Analog
(Internally connected to exposed thermal pad of QFN package.)
6 AVDD Analog Positive Analog Power Supply: 5 V for unipolar operation, 2.5 V for bipolar operation.
7 PLLCAP Analog PLL Bypass Capacitor: Connect 22nF capacitor to AVSS when using crystal oscillator.
8 XTAL1 Analog 32.768-kHz Crystal Oscillator Input 1; see the Chrystal Oscillator section.
9 XTAL2 Analog 32.768-kHz Crystal Oscillator Input 2; see the Chrystal Oscillator section.
10 PWDN Digital Input Power-Down Input: Hold low for minimum of two f
CLK
cycles to engage low-power mode.
11 RESET Digital Input Reset Input: Hold low for minimum of two f
CLK
cycles to reset the device.
Clock Select Input: Low = Activates Crystal Oscillator, f
CLK
output on CLKIO.
12 CLKSEL Digital Input
High = Disables Crystal Oscillator, apply f
CLK
to CLKIO.
13 CLKIO Digital I/O System Clock Input/Output (See CLKSEL pin.)
14 GPIO0 Digital I/O General-Purpose Digital Input/Output 0
15 GPIO1 Digital I/O General-Purpose Digital Input/Output 1
16 GPIO2 Digital I/O General-Purpose Digital Input/Output 2
17 GPIO3 Digital I/O General-Purpose Digital Input/Output 3
18 GPIO4 Digital I/O General-Purpose Digital Input/Output 4
19 GPIO5 Digital I/O General-Purpose Digital Input/Output 5
20 GPIO6 Digital I/O General-Purpose Digital Input/Output 6
21 GPIO7 Digital I/O General-Purpose Digital Input/Output 7
22 SCLK Digital Input SPI Interface Clock Input: Data clocked in on rising edge, clocked out on falling edge.
23 DIN Digital Input SPI Interface Data Input: Data is input to the device.
24 DOUT Digital Output SPI Interface Data Output: Data is output from the device.
25 DRDY Digital Output Data Ready Output: Active low.
26 START Digital Input Start Conversion Input: Active high.
27 CS Digital Input SPI Interface Chip Select Input: Active low.
28 DVDD Digital Digital Power Supply: 2.7 V to 5.25 V
29 DGND Digital Digital Ground
30 VREFN Analog Input Reference Input Negative
31 VREFP Analog Input Reference Input Positive
32 AINCOM Analog Input Analog Input Common: Common input pin to all single-ended inputs.
33 AIN15 Analog Input Analog Input 15: Single-Ended Channel 15, Differential Channel 7 (–)
34 AIN14 Analog Input Analog Input 14: Single-Ended Channel 14, Differential Channel 7 (+)
35 AIN13 Analog Input Analog Input 13: Single-Ended Channel 13, Differential Channel 6 (–)
36 AIN12 Analog Input Analog Input 12: Single-Ended Channel 12, Differential Channel 6 (+)
37 AIN11 Analog Input Analog Input 11: Single-Ended Channel 11, Differential Channel 5 (–)
38 AIN10 Analog Input Analog Input 10: Single-Ended Channel 10, Differential Channel 5 (+)
39 AIN9 Analog Input Analog Input 9: Single-Ended Channel 9, Differential Channel 4 (–)
40 AIN8 Analog Input Analog Input 8: Single-Ended Channel 8, Differential Channel 4 (+)
41 ADCINN Analog Input ADC Differential Input (–)
42 ADCINP Analog Input ADC Differential Input (+)
43 MUXOUTN Analog Output Multiplexer Differential Output (–)
44 MUXOUTP Analog Output Multiplexer Differential Output (+)
45 AIN7 Analog Input Analog Input 7: Single-Ended Channel 7, Differential Channel 3 (–)
46 AIN6 Analog Input Analog Input 6 : Single-Ended Channel 6, Differential Channel 3 (+)
47 AIN5 Analog Input Analog Input 5: Single-Ended Channel 5, Differential Channel 2 (–)
48 AIN4 Analog Input Analog Input 4: Single-Ended Channel 4, Differential Channel 2 (+)
6 Submit Documentation Feedback Copyright © 2009–2011, Texas Instruments Incorporated
Product Folder Link(s): ADS1258-EP