Datasheet

Evaluating Performance with the ADCPro Software www.ti.com
9.1.2 Clocks Tab
The next tab is the Clocks tab, as shown in Figure 31. This tab controls the master clock of the
ADS1256EVM. Enter the master clock frequency in the Clock In window. The clock source can be
selected from between the EVM onboard crystal and the MMB0. The DO/CLKOUT rate can be set by the
Clock Out Rate pull-down menu. There are options to set CLKOUT to f
CLKIN
, f
CLKIN
/2, f
CLKIN
/4, or to turn it off.
Figure 31. Clocks Tab
30
ADS1256EVM and ADS1256EVM-PDK SBAU090C–November 2003–Revised July 2010
Copyright © 2003–2010, Texas Instruments Incorporated