Datasheet

Evaluating Performance with the ADCPro Software

www.ti.com

9.1.4 Cal Tab

The Cal tab (Figure 22) controls the calibration functions of the ADS1248.

Figure 22. Cal Tab

Pressing the Self Offset Calibrate button causes the ADS1248 to perform a self calibration; the offset

and full-scale register values are then updated on the plug-in screen. You may also write to these

registers by typing in hex values in the New fields, then press the Set button. You may read the values at

any time by pressing the Read button.

ADS1148EVM, ADS1248EVM, ADS1148EVM-PDK, and ADS1248EVM-PDK SBAU142B– April 2009–Revised May 2011

Submit Documentation Feedback