Datasheet

ADS1248EVM-PDK Kit Operation www.ti.com
8.2 Setting Up the ADS1248EVM-PDK
The ADS1248EVM-PDK contains both the ADS1248EVM and the MMB3 motherboard; however, the
devices are shipped unconnected. Follow these steps to set up the ADS1248EVM-PDK.
Step 1. Unpack the ADS1248EVM-PDK kit.
Step 2. Set the switches on the MMB3 as described below, as shown in Figure 6.
• Set switch SW4 to the right.
• Set the DAC switch (SW5) to the OUT position (to the right).
Figure 6. MMB3 Switch Locations
Step 3. Plug the ADS1248EVM into the MMB3 as Figure 7 illustrates.
10
ADS1148EVM, ADS1248EVM, ADS1148EVM-PDK, and ADS1248EVM-PDK SBAU142B– April 2009–Revised May 2011
Submit Documentation Feedback
Copyright © 2009–2011, Texas Instruments Incorporated