Datasheet

www.ti.com ADS1246EVM-PDK Kit Operation
Step 3. Plug the ADS1246EVM into the MMB3 as Figure 7 illustrates.
Figure 7. Connecting ADS1246EVM to MMB3
CAUTION
Do not misalign the pins when plugging the ADS1246EVM into the MMB3.
Check the pin alignment carefully before applying power to the PDK.
Step 4. Set the jumpers and switches on the ADS1246EVM as shown in Figure 3 (note that these
settings are the factory-configured settings for the EVM).
11
SBAU149B–June 2009–Revised May 2011 ADS1146EVM, ADS1246EVM, ADS1146EVM-PDK, ADS1246EVM-PDK
Submit Documentation Feedback
Copyright © 2009–2011, Texas Instruments Incorporated