Datasheet

www.ti.com

ORDERING INFORMATION

ABSOLUTE MAXIMUM RATINGS

ADS1232

ADS1234

SBAS350F – JUNE 2005 – REVISED FEBRUARY 2008

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

For the most current package and ordering information, see the Package Option Addendum at the end of this

data sheet, or see the TI website at www.ti.com .

over operating free-air temperature range (unless otherwise noted)

(1)

ADS1232, ADS1234 UNIT

AVDD to AGND – 0.3 to +6 V

DVDD to DGND – 0.3 to +6 V

AGND to DGND – 0.3 to +0.3 V

Input Current 100, Momentary mA

Input Current 10, Continuous mA

Analog Input Voltage to AGND – 0.3 to AVDD + 0.3 V

Digital Input Voltage to DGND – 0.3 to DVDD + 0.3 V

Maximum Junction Temperature +150 ° C

Operating Temperature Range – 40 to +105 ° C

Storage Temperature Range – 60 to +150 ° C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

Product Folder Link(s): ADS1232 ADS1234