Datasheet

Running the Software

www.ti.com

Figure 32. PC Application Live Respiration Channel

Live ECG display or respiration display is started by clicking on Start Data Streaming and can be stopped

by clicking on Stop Data Streaming.

The following buttons/controls are available in this sub-tab:

Buttons/Control Description

Lead selection The following can be selected for the live display

● ECG Lead I

● ECG Lead II

● ECG Lead III

● ECG Lead aVR

● ECG Lead aVL

● ECG Lead aVF

● Respiration Channel (ADS1292R only)

Signal BW Signal bandwidth can be selected to either 40 Hz or 150 Hz. The filter on the EVM board is

automatically enabled based on the selection made.

Notch filter Provision for selecting either 50-Hz or 60-Hz notch filter. The filter on the EVM board is

automatically enabled based on the selection made.

Auto scaling Both x-scale and y-scale auto scaling is possible. User can enable or disable this feature.

(Right-click on the display area)

Export data The displayed data can be exported to EXCEL™ or the clipboard.

(Right-click on the display area)

Visible items selector Option to display x-scale, y-scale, plot legends, x-scrollbar.

(Right-click on the display area)

Plot legend options Plot legend gives various option to change the color of the plot, various plotting styles, etc.

(Right-click on the plot legend)

The Lead-off Status is interpreted as shown in the table below.

ADS1x9xECG-FE Demonstration Kit SLAU384A–December 2011–Revised April 2012

Submit Documentation Feedback