Datasheet
Running the Software
www.ti.com
The LOFF and RLD tab consists of the settings to enable lead-off, selecting the channels for lead-off
detection and deriving the Right Leg Drive signal. General options including clocking are also available on
this tab.
Figure 21. Register Configuration – LOFF and RLD
The GPIO Registers tab consists of the GPIO settings.
Figure 22. Register Configuration – GPIO
18
ADS1x9xECG-FE Demonstration Kit SLAU384A–December 2011–Revised April 2012
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated